• ACE-2.4GHz-AP-150-1W

150Mbps High Power Outdoor AP with POE

1000mw high power output 64MB RAM Ralink3050 chipset

·         High-Power solution provides you larger wireless range and enhance mobility of usage

·         IEEE 802.11b/g/n compliant with 150Mbps high-speed data rate

·         Wireless modes: Gateway, WDS, Repeater, AP Mode, Wireless ISP

·         Wireless users access control

·         With function of Base Station Access Point for WISP

·         With function of AP Client, PTP, PTM

·         Wireless security - 64/128bit WEP, WPA/WPA2,

·         Support 802.1d Spanning Tree

·         Quick and easy setup with Web-based management utility

·         Power Over Ethernet support

·         Weather proof case against rugged environment

·         Supports UPnP, DDNS, static routing, VPN Pass-through

·         Supports virtual server, special application and DMZ host ideal for creating a website within your LAN 

Excellent performance, super wider working range, best choice for residential community network. ACE-2.4GHz-AP-150-1W uses leading high quality wireless chipset which conform to IEEE 802.11b/g/n standard. SMA Male Connector to connect your choice of antenna, so the Wi-Fi signal can be transmitted to farther distance, which covered wider area. It makes Wi-Fi cover so easy and cost saved compared with Wired networking in human, materials and time. The point to Multipoint working distance of ACE-2.4GHz-AP-150-1W can be more than 2 KM.

Implement networking by simple way:

With high gain directional or Omni antenna, the wireless transmit distance is much improved, especially in open area. In practical application, it can transmit Wi-Fi signal to 2000 meters in open area, generally placed in a city or village buildings.

Long distance PoE power supply:

ACE-2.4GHz-AP-150-1W Support 12V DC power supply and 12/24V PoE power supply. User can choose suitable power supply solution. Then for PoE power supply, it is powered over Ethernet while internet data transmission, the Ethernet cable can be 60~100 meters. So this device can be placed in area where no DC power supply, it not only decreased the cost, but also better for united management.

Straight forward configuration procedures and remote control:

The ACE-2.4GHz-AP-150-1W configuration procedures are very simple for users. Just click “Next” to finish the configuration in the software page, which provides simple and faster service for you and your customers. With wireless AP, repeater, WDS repeater, wireless ISP and gateway mode, which implement achieve wireless coverage and networking in suitable way. Also it has much utilitarian function, such as IP bandwidth control DDNS firewall traffic statistics. What`s more, it can support restart and recover the device by remote control.



IEEE 802.11n, IEEE 802.11g, IEEE 802.11b

Frequency Band


Radio type


IEEE 802.11g: OFDM(64-QAM, 16-QAM, QPSK, BPSK) 

IEEE 802.11n: OFDM(BPSK/QPSK/16-QAM/ 64-QAM)

Data Rate

11n: 150/135/121.5/108/81/54/40.5/27/13.5Mbps



11g:   54/48/36/24/18/12/9/6M adaptive

11b:   11/5.5/2/1M adaptive

Access Protocol

CSMA/CA, CSMA/CD, TCP/IP, ICMP, NAT, PPPoE, DHCP, Wired static, Wi-fi Client, UDP, DDNS

Wireless Mode

Gateway, Repeater, WDS, AP Mode

Wireless ISP



64/128bit WEP

 WPA(AES, TKIP with IEEE 802.1x)

 WPA2(AES, TKIP with IEEE 802.1x)


RF Output Power(Typical)

802.11n: 25±2dBm for OFDM mode

802.11g: 27±2dBm for OFDM mode

802.11b: 30±2dBm for CCK mode

Receive Sensitivity

11n : -72±2dBm@10% PER

11g : -75±2dBm@10% PER

11b : -92±2dBm@8% PER


SMA Male Connector

Dimension (mm)




Operation Temperature

 0°C ~ 40°C ambient temperature

Storage Temperature

 -20% ~ 70% ambient temperature


 10% ~ 90% (Non-condensing)


One RJ-45 WAN port

One RJ-45 LAN port

Reset to default button/WPS button

Power requirement

Output DC12V(POE 12V/24V), 1A;Input 110V/220V


Power, Wi-Fi, WAN, LAN


For setting



Radome Material

For Antenna


  • Brand: AceNet
  • Product Code: ACE-2.4GHz-CPE-150-1W
  • Availability: 2-3 Days
  • INR3,150.00

Available Options